Mountable UV-C Surface Disinfectant and Sanitizer

At this point we are moving as quickly as possible to fulfill all 35 watt mountable orders. Orders placed today should be fulfilled within 4-5 weeks as there is a backlog from the increased demand due to Coronavirus.

This GermAwayUV product, equipped with a premier UV-C 35 Watt bulb is an efficient way to disinfect those hard worked surfaces that require germicidal cleaning and disinfection. With no alcohol or chemicals, this device is much more effective than traditional wipes or sprays which typically contain chemicals, and is suitable for use across a range of industries. Its efficacy is as a result of the 254nm wavelength UV-C rays emitted from the lamp which are in turn enhanced and focused, by an electronically brightened reflector. These UV-C rays are strong enough to kill even the most resistant of bacteria and germs.

LIGHTWEIGHT

MOUNTABLE OR PORTABLE 

SHATTERPROOF LAMP 

LONG LAMP LIFE - UP TO 10,000 HOURS 

EASY TO OPERATE 

REFLECTORS ENHANCE FOCUS OF UV-C RAYS BY UP TO 30%

The bulb is available with a shatterproof coating that in case of damage keeps the lamp glass from falling into the unit where is installed. This results in an easy way to dispose of glass if it shatters. You can select this shatterproof option above.

Do I need shatterproof coating?

Although shatterproof coating can lower the intensity of the UV-C bulb by as much as 15%, it is recommended for applications in which it is crucial to avoid potential glass breakage at all costs. These applications include but are not limited to food processing and medical institutions. However, if glass breakage would be inconvenient but not catastrophic, skipping the costly shatterproof coating is quite alright. After all, we do not use shatterproof coating with our glasses and plates at home.

Technical Specifications: 

•  Light wave length: UV-C 253.7nm 
• Voltage Supply: 120V, 60 Hz 
• Output: 35 Watts  
• Device Dimension: 10.7" x 5.1" x 3.8" 
• Bulb Length: 8.86"
• Weight: 4 lbs.

Here at CureUV you can rest assured that we take your safety very seriously. So we’ve included guidelines and procedures of how to use the device so that you know exactly what you’ll be getting into. We’re sure you’ll agree that it’s easy to use!

One last feature that we think makes this product particularly useful is that you can use it on its own as a singular unit, or you can combine several units to create a chain of sanitizers for use over a long extended surface. 

The device can be used for the following surfaces

UVC is unsafe for skin and eyes! Please use appropriate personal protective equipment and avoid any UVC exposure to your eyes and skin!

UVC Output (measured on EIT UV Power Puck II)

• @1" from bulb outputs 20 mw/cm²
• @5" from bulb outputs 3 mw/cm²
• @10" from bulb outputs 1 mw/cm²

If you would like to see a calculator that lists out specific microbes by name, please click here.

Warning: Ultraviolet UV-C light is harmful to your eyes and skin. Use proper safety gear.

How do I know it is actually working?!

Our customers often ask us how they know that the Premier 35 Watt Mountable UV-C Sanitizer is actually working. It is a pretty reasonable question to ask. After all, the disinfection that UV-C provides is happening at a microscopic level. This is why we have started including a set of free UV-C Visualizer Strips along with all GermAwayUV Surface Disinfection products. Simply put the UV-C Visualizer card on the surface that you wish to disinfect and run the system for the amount of time you plan to use for full disinfection. After running the unit for a cycle the yellow strip on the card should change from a bright yellow to a light green. If there is no color change then you need to either slow down the rate at which you disinfect or place the substrate closer to the mountable unit.

 Special Notice!

Warning: Ultraviolet UV-C light is harmful to your eyes and skin. Do not look directly at the bulb and always use the included UV Glasses when utilizing this tool. 

UV-C Safety Basics: