Germicide Reflective Paint - Lumacept Bright

Germicide Reflective Paint - Lumacept Bright will almost eliminate the problem of shadows in your UVC disinfection cycles.

UVC sanitation is the safest method for getting rid of unwanted bacteria, viruses, yeast, and even mold. Unlike disinfectant chemicals, UV-C light does not leave any residue once the cleaning cycle is over. That is why UVC light is being used more frequently by healthcare professionals, and those who hare susceptible to chemicals. UVC is also the best way to kill viruses that are resistant to antibiotics.

Because of the nature of UVC light, the only downside is created by shadows. Shadows protect bacteria, which means you would need to perform more cycles at different positions in the room to reach all surfaces.

Lumacept makes those shadows get 14 TIMES more UVC light than regular paint.

Normal house paint absorbs 97% of UVC light. 

Germicide Reflective Paint behaves like normal paint on its application. Unlike normal household paint, Lumacept reflects light back into the room. Thanks to this property, shadows are lessened in area and intensity, making the disinfection process more efficient and effective.

This product requires curing with a medium pressure mercury UV System producing at least 500 mW/cm2 of intensity. We recommend utilizing our Total-Cure1100s or the Total-Cure 2400 or a medium pressure mercury UV Curing Conveyor for optimal results.

Lumacept Germicide Reflective Paint saves you time and money

With it, you will be able to use the room sooner and, since you will need less cycles, your bulbs will last longer!

Germicide Reflective Paint - Lumacept Bright is the ideal balance between cost and efficiency. It offers 7x the reflective power of regular paint. This paint is best for those who would like a more thorough, and shorter, disinfection but do not have immunocompromised people or animals to worry about. 

Features:

• Reflects germicide UVC light
• Easy to use, applies like regular paint
• Can be thinned with water (Other thinners may affect reflectivity index)
• White color
• Perfect for households with pets, kids, or elders
• Available in 1 or 5 gallon pallet
• 7x the reflective power of regular paint
• Safe for any size room
• Ideal for any home and office
• Increases reflectivity while maintaining cost down
• Reduces disinfection time by 80%

 Application

1. Clean surfaces of any dust, oil, and other substance. 
2. Stir paint properly.
3. Get adequate ventilation.
4. Brush, roll, or spray. Thinning can be done with water. Apply thin coats.
5. Soap and water cleanup.
6. Latex based paint creates a film over time. Take care when scrubbing the paint for a few days after application.

• Spot testing is necessary for non-typical or hard to paint surfaces
• DO NOT apply when the surface is at 55 F or below
• Mixing with paint, tints, pigments, or other additives has the potential of destroying the UVC reflective properties of Lumacept
• Not for use in combination with permanent UVC systems. ONLY for use in room where UVC is done with no one present.

SPEC SHEET AND STUDIES

SDS

Inks are non-returnable and non-refundable