Heraeus Fusion F600S

The Hareaus F600S is a reliable and solid performing system that operates at 600 watts/inch and is composed of a 10-inch wide irradiator (lamp module), a microwave electrodeless bulb and power supply. Designed for effectively curing a wide variety of applications such as industrial curing of inks and coatings. Requires external blower for cooling.

Heraeus Noblelight Advantages:

• More Efficient and Faster UV Curing from High Peak Irradiance and Low Infrared
• The Irradiator: Higher production rates, reduced maintenance, energy savings and flexibility
• The Power Supply: Easy, quick start-up, safe operation, eliminate scrap, easy production line integration and easy maintenance
• The Electrodeless Bulb: Long bulb lifetime, rapid start and restart, less heat to substrate, reduced maintenance, full cure width maintained throughout bulb life
• Reduced downtime with easy troubleshooting: front panel displays data, stores 10 fault data points
• Simple installation, easy-to-use controls and software updates via USB interface
• RoHS design for CE compliance
• Robust and reliable operation and control, even in harsh environments, due to effective electrical isolation
• Popular Bulb Spectra Available
• The most economical first cost

Its construction stands out thanks to the use of a microwave lamp that operates without the metal electrodes required in conventional arc lamps. This UV lamp system’s power stems from technical enhancements to the I600M irradiator and the P600M power supply. The P600M power supply has two power levels and is microprocessor-controlled. During operation, the LCD offers continuous status updates and instant system diagnostic information. The irradiators can be placed end-to-end to create a lamp system of Heraeus Noblelight F600S almost any length, providing high uniformity for wide applications.

Heraeus Noblelight’s modular, microwave-powered UV lamp and bulb technology is universally recognized for outstanding stability and long operational life. Our product development is driven by a customer-centric mandate of continual innovation and improvement.

Technical Data Sheet:

Technical Specifications for the F600S

Irradiator Model I600M

• Lamp bulb length: 25 cm
• Power settings: two levels,160 or 240 W/cm
• Compatible with DRS 10/12 floor standing conveyors
• Weight:
  • I600M: 18 kg (39 lbs.)
  • I600MB: 25 kg (55 lbs.)
• Dimensions: 440 mm (17.3 in.) high x 210 mm (8.2 in.) wide x 270 mm (10.6 in.) long
• Cooling Air: Minimum 7.7 m3/min. (270 scfm) of filtered air at 2.2 kPa water gauge (8.9 in.) at the inlet (2.0 kPa inside the irradiator housing)
• Exhaust: Minimum 10.6 m3/min. (375 scfm) at -50 Pa water gauge (-0.2 in.) measured in the light shield
• Reflector Geometry: Focus 53 mm (2.1 in.) from irradiator face (209 end reflectors available for far-field curing)
• Lamp Power: Full power: 240 W/cm (600 W/in.); *6,000 watts total
• Footprint: 267 mm (10.5 in.) x 206 mm (8.1 in.)
• Light Shield: Available upon request to customer specifications
• Bulbs Available: H, H+, D, V, Q, M

Power Supply Model P600M

• Weight: 80 kg (177 lbs.)
• Dimensions: 221 mm (8.7 in.) high x 467 mm (18.4 in.) wide x 754 mm (29.7 in.) long
• Voltage: P600M: 380, 400, 415 volts, 3 phase, at 50 Hz or 380, 400, 460, 480 volts, 3 phase, at 60 Hz (specify at time of order). (Operation from 200, 208, 220, or 240 volt requires customer-supplied step-up transformer(s).)
• Line Power:8 kVA, 3 phase (6.2 kVA/phase)
• Rear Clearance: 300 mm (12 in.) required (for connections and air flow)
• Bulb Input Power Levels:
  •  Full power: 6,000 watts
  • Low power: 4,000 watts
• Interconnecting Cables: Circular connectors with locking rings (not interchangeable with other Heraeus Noblelight power supply cables)
• Control Voltage: Supplied internally

Utilities

• Maximum Line Power:8 kVA @ 100% power
• Maximum Line Current:
  • 50 Hz, 16 amps
  • 60 Hz, 16 amps
• Water: None required
• Input Voltage: 380–415/380–480 V (50/60 Hz)
• Compressed Air: None required

NOTE: A separate blower power connection (200–240 VAC, single phase) is required to provide electrical power to the I600MB blower.

The basic F600S [240 W/cm (600 W/in.)] system consists of the following items:

•  An I600M-series irradiator.
• A P600M power supply.
• One cable assembly to connect the high voltage and control outputs from the power supply to the lamp.
• A Heraeus Noblelight RF (microwave) leakage detector assembly, RF-1.
• One cable assembly to connect the power supply to the RF detector assembly.

If you have any questions or want to know more, we would love to help you with your UV curing. Please reach out to us at sales@cureuv.com or between 8:00 a.m. and 4:30 p.m. EST at 1(800) 977-7292.