Total-Cure UV Hardwood Floor Refinishing - Basic Starter Kit

• 1 Handheld Irradiator with 50 foot cable
• 1 Floor Irradiator - Adjustable Arm Length & Head Position
• Distributes 3W/cm^2 of UV-A Curing Intensity @ High Power
• 220 VAC
• Fully Assembled & comes with convenient Standby Nest
• Pre-wired with rapid change plug
• High / Low Output Switching
• Auto Switching to Low during standby
• Forced Air Cooling - Integrated cooling for enhanced system reliability
• (2) Military Grade Pelican Cases with Wheels for Easy Transport & Protection of Investment
• Cures Waterborne/UV and 100% solid UV Coatings
• Cures 100% Solid UV Coatings without "Zipper Marks" or "Lap Lines" at Any Sheen

Our Total-Cure UV hardwood flooring finish basic starter kit includes everything you need to complete your project. This kit includes: PowerShot handheld UV floor curing system, UV curable sealer, Satin Waterborne/UV finish, Padco heavyweight floor coater (6012), Padco Nylfoam floor coater refill (6001), Padco Woven floor coater refill (6005), and Ultraviolet safety kit (gloves, shop coat and face shield).

The Total-Cure PowerShot wood floor curing dryer comes with 2 light weight irradiators that have a Proprietary Array Delivery of UV energy that protect your work against "zipper marks" and "lap lines". Also includes a safety kit with protective gloves, shop coat and face shield. In a class of its own, this system is strong enough to instantly cure BOTH Waterborne/UV & 100% Solid UV Curable Coatings.

The Total Cure UV PowerShot Floor Curing System is the most versitile system in it's class. It has the highest maximum output in the industry coupled with portability and an 8 inch cure width puts it in a class all its own. This UV floor curing system is designed for user friendliness and mobility. The irradiator for the UV Floor system can be locked to any fixed position offering a full range of curing options for tight corners, closets, under cabinets and baseboard moldings.

It works perfectly on any UV curing application where quality cannot be sacrificed and customer satisfaction is a must. Requires virtually no learning curve or set up time. The handheld flooring system is powered on with a light squeeze handle, allowing for a quick release power off. Simply needs a 220 volt power source to operate. The two military Grade Pelican cases with wheels allows for easy transportation and protection of investment that combines everything needed for maximum portability.

CureUV's personalized and knowledgeable technical support is dedicated to your specific needs. When you call, you will speak directly to an Applications Expert with extensive product knowledge and hands-on expertise. Technical manuals, print packet and CureUV's personalized and knowledgeable technical support dedicated to your specific needs are included with your equipment.

Guarantee a long-lasting finish while enhancing the natural beauty of the wood. The adhesion promoter/sealer with enhanced solids offers increased bonding strength of the next UV curable builder coat and dries with the ultraviolet light while you're curing the builder or topcoat. This UV coating has a high viscosity (HV) for a thicker finish with bridgeable characteristics. In addition, this product provides superior resistance to contaminants that permeate through the wood into your newly finished floor or losing your builder/topcoat due to absorption.

• Provides Superior Adhesion Promotion and sealing properties for UV curable coatings
• Guaranteed sealing of contaminants such as oil penetration from within the wood and loss of UV finish being absorbed into the wood
• Fastest Drying Waterborne in the Industry
• Enhanced Adhesion Promoter/Sealer is easily cured simultaneously with the next UV curable coating
• Waterborne/UV Cure - NO VOC's (Green-Friendly Technology)

Get your project done in HOURS, not DAYS. This Waterborne/UV curable satin topcoat adds to the depth and beauty of wood flooring and makes the finisher competitive, while allowing profitability. It is easy to apply the self-sealing topcoat and the instant curing allows for increased productivity, less error and your customers can leave in the morning to return the same day with NO solvent smells and furniture back in place.

This hybrid technology allows surface build similar to a conventional lacquer appearance but with the chemical and physical resistance that only UV cured coatings can provide. The finish achieved with UV curable coatings is simply beautiful and the physical properties are exceptional in durability and resistance to abrasion, water and chemicals that are superior to conventional coatings. The water content must be evaporated followed by UV curing.

• Guaranteed More Coverage per Gallon
• 100% UV curable products don't evaporate or shrink
• Dry Instantly with UV Light - No Wait time
• No Mixing and ready to use right out of container
• No VOC's, No Solvent Smells and Non-Flammable
• Significantly more resistant to scratches, abrasion and wearing than out-dated conventional finishing products

This Padco 6012, 12 inch Heavyweight Floor Coater (T-Bar Applicator) is specially weighted to control the uniformity and even thin mil thickness of the coating. Heavyweight applicators are designed to apply a thinner layer of finish for increased coverage. Padco floor coaters are the fastest, most efficient floor finish applicators available, with normal coverage of 10,000 square feet per hour.

Padco Floor Coaters come with a convenient swivel handgrip that accepts standard threaded extension poles.

Providing you with with professional, even, consistant coverage every time. Refill not included.

• UV Wood floor finishes
• UV Waterborne floor finishes
• Waterborne floor finishes
• Solvent based floor finishes

This Padco 6001, 12 inch Floor Coater (T-Bar Applicator) Nylfoam Refill is for use with all of our coatings. Specially designed Nylfoam applies a precise, smooth, lint-free finish to wood.

They apply with amazing speed and reward you with professional, even and consistent coverage. Their unique cushioned squeegee action leaves a smooth, streak and bubble-free finish every time.

For discounted pricing, item must be purchased in multiples of 6.

• UV Wood floor finishes
• UV Waterborne floor finishes
• Waterborne floor finishes
• Solvent based floor finishes

This Padco 6005, 12 inch Floor Coater (T-Bar Applicator) Woven Refill is for use with all of our coatings. The woven fabric resists shedding and reduces swelling.

They apply with amazing speed and reward you with professional, even and consistent coverage. Their unique cushioned squeegee action leaves a smooth, streak and bubble-free finish every time.

• Same Foam
• Same Performance
• Different Color

For discounted pricing, item must be purchased in multiples of 6.

• UV Wood floor finishes
• UV Waterborne floor finishes
• Waterborne floor finishes
• Solvent based floor finishes

• Polyester/Cotton blend
• Navy blue
• Size 46

• Split Deerskin
• 4" Gauntlet cuff
• 12" large

• Eye protection for UV-A, UV-B and UV-C spectral outputs
• Shade #5
• Ratchet adjustable headgear that fits head sizes 6-1/2-8
• Simply turn a knob to adjust