UV TopCoat for Stone and Concrete
|
SKU: |
|
The UV TopCoat for Stone and Concrete provides you with a smooth, long-lasting, and scratch resistant surface.
The UV TopCoat if a Polyester/Epoxy Acrylate designed to work on Stone and Concrete surfaces to provide a brilliant scratch resistant surface.
This product can be used as its own sealer as it is very sandable and has great adhesive properties to itself.
The UV TopCoat for Stone and Concrete is low viscosity, 100% solids coating with excellent flow, uniform coverage, and leveling properties.
Note: The gloss level can be controlled between 15% (matte) to 95% (wet-look). Simply specify gloss level under the "Notes" section in your cart.
Application:
- Apply to a wet thickness between 0.75 to 1.25 mil (18 to 32 microns)
- It may be applied by spray, brush, or roll methods
- Cure with a high intensity UV "H" lamp delivering a dose of 200 to 250 mJ/cm2
Note: for non-slip requirements, a fine silica grit (400 mesh) may be sprinkled over the surface of the wet TopCoat before curing
Designed to work with:
Features:
- Fast Curing
- Scratch resistant
- UV Cure - Low VOC's and zero hazardous air pollutants (Green-Friendly Technology)
Technical Data Sheet:
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.